交通工具空气弹簧的新型安装方法:合理的安装空气弹簧能延长其运用保存生命的年数,在平时的维修中,对于已损伤或者漏气的空气弹簧,我们是需求及时进行更换的。那么,该怎么样迅速的更换空气弹簧呢?
New installation method of vehicle air spring: reasonable installation of air spring can extend the use of the number of years to preserve life, in the usual maintenance, for the damage or leakage of air spring, we are in need of timely replacement.So, how to quickly replace the air spring?
1.空气弹簧安装前,先在弹簧上下底座均匀涂抹润滑油胶,以减少新空气弹簧安装时产生的磨擦力,同时尽量照顾空气弹簧及其接触位置不易受损。
1. Before the air spring is installed, apply the lubricating oil glue evenly on the base above and below the spring to reduce the friction force generated during the installation of the new air spring, and try to take care of the air spring and its contact position is not easy to be damaged.
2.将新空气弹簧放于干燥的最简单的面上,双手用力量抓稳弹簧两侧,用力将弹簧向下压至其大小足够放入“上下底座”区间。
2. Put the new air spring on the simplest dry surface, hold both sides of the spring firmly with both hands, and press down the spring until its size is large enough to be placed in the "up and down base" area.
3.安装时,先将空气弹簧底部与下底座联系,再调整弹簧顶部进入了上底座,待空气弹簧基本放入上下底座之间时,掀开大气的压力阀对弹簧进行充气,同时维修担担任职务务的人需双手扶稳弹体,防止其过度移位。
3. When installing, first connect the bottom of the air spring with the lower base, and then adjust the top of the spring into the upper base. When the air spring is basically placed between the upper and lower bases, lift the atmospheric pressure valve to inflate the spring.
4.充气10-15秒后,空气弹簧充气完结。此时用泡沫儿水喷洒散落在弹体上,仔细检查新装的空气弹簧严密封闭性是否令称呼心,弹体是否有破损,如无问题,则安装完成,车辆可以正常营运。这种橡胶空气弹簧安装方法比较省时省力,并且独自一个人就能完成。希望大家看了在这以后能有所收获。
4. After 10-15 seconds of inflation, the air spring inflation is completed.At this time with foam water spray scattered on the bullet body, carefully check the new air spring tight closure is called the heart, whether the bullet body is damaged, if there is no problem, then the installation is completed, the vehicle can operate normally.This rubber air spring installation method saves time and effort, and can be completed by a person.I hope you've seen this and you've seen it.